The Farmer Super mole trap with chains keeps moles in both the mole tunnel and the mole litter! The Mole Trap Farmer is the all-round mole trap that can be placed in both the mole tunnel and the mole bed. This allows it to be caught in any situation. When using the trap in the mole tunnel, it is advisable to use two traps. Very easy to pick up, excellent catching results thanks to the spring. The chain prevents loss of the locking plate. The mole trap is fully galvanized for a longer life. First remove the mole hill before setting the trap. When a vertical hole is formed, place the trap in the closed position until the tilt point of the tension arms does not touch the ground. Tighten the trap while moving it back and forth slightly to allow the teeth to move freely. Keep the trap under tension and seal the top of the mole tunnel with grass or soil. Place the clamping plate as close as possible to the round eye of the tensioner arms. The mole trap is ready to catch. Dig out a piece of soil until the tunnel is visible. In this position 2 traps should be used. Place 1 trap, as far as possible, in the left tunnel, place the trap on top of it, tighten it, seal the tunnel with some soil and place the locking plate. Repeat this for the right tunnel. Prevent dirt from laying in front of the two locking plates so it does not affect proper operation. Size: 15,5 x 16 cm

Weight: 0,19 g
Width: 16 cm
Height: 14,5 cm
Length: 16 cm

1 st