Fenix ​​E01 V2.0 is a pocket EDC flashlight in the form of a pendant , which after modernization emits a stream of 100 lumens , has 3 useful lighting modes , a longer range and an economical controller without standby electricity. Main changes: New CREE XP-G2 S3 diode with a stronger beam of light, greater range - up to 35 m, longer working time - up to 25 hours, 3 work modes, collimating lens, smaller size, lighter structure, working time up to 200 h. Light and durable The body of the Fenix ​​E01 V2.0 flashlight is made of hardened aluminum , subjected to the HA-III hard anodizing process, thanks to which the tube and head of the flashlight are resistant to scratches, abrasion and mechanical damage. After reducing the dimensions of the flashlight by 5 mm, it is more handy and comfortable to use. After the modernization, the flashlight weighs only 13 g , which is almost half as much as the popular battery of the finger. The knurled aluminum surface improves grip and prevents the flashlight from slipping out of your hand. We can conveniently activate the flashlight and change the modes by turning the head. Stronger and farther The light source is the efficient Fenix ​​E01 V2.0 diode, which in high mode emits a beam of 100 lumens with a brightness of 304 candela and a range of 35 m . The light is evenly and widely diffused thanks to the use of an ultra-thin collimating lens. Modes of operation The user has 3 light modes at his disposal: low, medium and high . In the high mode, the flashlight can work up to 50 minutes, in the low mode of 5 lumens, up to 25 hours. The 5-lumen illumination is sufficient for spot lighting of a purse, toolbox or opening a door lock. Power - light and easily accessible The flashlight is powered by one AAA alkaline battery , which can also be replaced with a Ni-MH battery. The advantage of such a power supply is its easy availability, low cost and the imperceptible weight of the flashlight. The long operation time of the flashlight is due to the use of a driver that does not consume electricity in standby mode . Rotary switch The flashlight is activated and the modes are changed using a rotary switch (rotation of the flashlight head), which can be conveniently operated with one hand. The minimalist interface makes the flashlight perfect for everyday applications, where we usually just need quick access to light. Security The flashlight has a system that protects the optical system against overheating . The diode in high mode generates a lot of heat, to lower the temperature, the controller will automatically reduce the flux by a few lumens. The high protection class IP68 makes the flashlight resistant to complete immersion in water (to a depth of 2 m), dust, dirt and fall. Fenix ​​E01 V2.0 is a light and handy flashlight with an efficient beam of light , which will be perfect for everyday use, as an EDC equipment element or as a spare flashlight. The presented parameters were obtained in laboratory conditions. During the tests, a Ni-mH 750 mAh battery and a Pairdeer alkaline battery were used. TECHNICAL DATA Basic information Number of modes 3 Working time [h min] 25 h Luminous flux [lm] 100 Range [m] 35 Technologies used Diode type white: Cree ™ XP-G2 (S3) Security IP tightness class IP68 Power Cell type acceptable disposable (primary) batteries, reusable battery (secondary) Power AAA × 1 Additional data Colour black Luminous intensity [cd] 304 Housing material anodized duralumin Fall resistance [m] 1 Dimensions Overall length [mm] 66.5 Weight without batteries [g] 13 Head diameter [mm] 15 Body diameter [mm] 14 Included Flashlight kit components AAA battery × 1, a ring for attaching the flashlight to the keys, spare O-ring × 1 (spare seal) Warranty Warranty period 24 months at the distributor + 60 months at the manufacturer

1 st