The Fenix E12 V2.0 is an EDC flashlight that after modernization emits 160 lumens of luminous flux , has 3 lighting modes , longer range, two-position clip and economical control without standby power.Main changes:New Match CA18 diode with more powerful beam,longer range - up to 68 m,longer working time - up to 70 hours,3 working modes,collimating lens,smaller size,lighter weight,economical control without standby power,two-position clip.Lightweight and durableThe Fenix E1 V2.0 flashlight body is made of hardened aluminium, subjected to the HA-III hard anodizing process, which makes the flashlight tube and head resistant to scratches, abrasion and mechanical damage.The flashlight is more handy and comfortable to use after being reduced in size by 12 mm. After the modernisation, the flashlight weighs only 27 g, the same as the popular fingerprint flashlight.The resin coated aluminium surface improves grip and prevents the flashlight from slipping out of your hand. The flashlight is switched on and the modes are switched in the traditional way using the switch on the back.More powerful and efficientThe light source is a cool-coloured, efficient LED Match CA18, which emits 160 lumens of luminous flux on high mode, with a brightness of 1133 candela and a range of 68 m. The light is evenly and widely diffused (86°) thanks to the use of an ultra-thin collimating lens.Operating modesThe user has 3 light modes: low, medium and high . The 5 lumen illumination is enough to discreetly illuminate the inside of a purse, toolbox or to open a door lock.Power - lightweight and easy to accessThe flashlight is powered by one AA alkaline battery, which can be replaced with a rechargeable Ni-MH battery. The advantages of such a power supply are easy accessibility, low cost and the flashlight's unobtrusive weight.The flashlight's long operating time is due to the use of a drive that consumes no power in standby mode.Rotary switchThe flashlight is activated and modes can be switched using the rear switch. Fenix E12 V2.0 has an alternative brightness modification mode, operated by a rotary head. Regardless of the mode, the flashlight can be comfortably operated with one hand, even in total darkness.The minimalist interface makes the flashlight perfect for everyday applications where you usually only need quick access to light.Two-position clipThe functionality of the E12 V2.0 is greatly enhanced by a two-position clip that allows you to attach the flashlight to the top of the cap and use it as a headlamp. SafetyThe flashlight uses a drive with linear operating characteristics . This means that the flashlight automatically reduces the flux (reduces the operating mode) when the battery voltage drops. This allows the flashlight to operate normally until the battery is fully discharged.Thanks to the high IP68 protection class, the flashlight is resistant to full immersion in water (up to 2 m depth), dust, dirt and drops.0 is a lightweight and practical flashlight with a powerful beam that will be perfect for everyday use, as an EDC battery or as a backup flashlight.SPECIFICATIONSPage info Number of modes 3 Working time [hrs/min] 70 Luminous flux [lm] 160 Range [m] 68Applied technologies Diode type white.000 hoursSafetyIP sealing class IP68 PowerCell type acceptable for disposable (primary) batteries,Rechargeable battery (secondary)Power AA × 1 Additional informationNarrow angle [°] up to 85 (wide)Colour blackLuminosity [cd] 1133Housing material anodized duralumin Drop resistance [m] 1DimensionsTotal length [mm] 78Weight [g] 27Head diameter [mm] 19Body diameter [mm] 18IncludedIncludedIn flashlight kit elementsshort armband (bow) (lanyard),spare O-ring × 1 (spare gasket)

1 st