The Lansky LK3DM is a professional sharpening system consisting of 3 different grades of diamond stones, clamps and guides, allowing the selection of the correct angle and full control of the sharpening process.Lansky sharpening systems are widely recognised as some of the best and relatively cheapest professional sharpening machines in the world.Based on many years of experience, Lansky has created an extremely simple and efficient system that allows the selection of the sharpening angle depending on the type and purpose of the knife, as well as the very precise grinding while maintaining a constant angle.In contrast to the classic "manual sharpening", which requires manual dexterity and experience, the system allows the correct angle control to be maintained, so that you can be sure that the sharpening is carried out correctly.The effect of this sharpening is easy to predict, the cutting edge is perfectly sharp and retains its working life much longer.The diamond plate set is designed for sharpening hard, highly hardened steel knives such as the CPM-S30V or M390.The ease of use, high efficiency and effectiveness of Lansa systems means that your knife can always be "razor sharp" without the need to buy multiple sharpening machines.Setup and operationThe system consists of a clamp, metal guides and grinding stones. The T-shaped aluminium clamp is used to hold the knife firmly in place, preventing it from moving during grinding.Once the knife is clamped in the clamping jaws (using screws), connect the guide to the grinding stone, then select the angle that best suits the type of knife and its purpose.Setting the sharpening angle is simple: the guide is inserted in the cuts with the predefined angles: 17°, 20°, 25° and 30°.The clamp is double-sided, so to sharpen the other side of the blade you just need to turn the clamp and move the guide with the stone without disassembling the knife.Sharpening anglesThe clamp has 4 sharpening angles, designed for different types of knives:17° - fillet knives, kitchen knives, precision cutting tools,20° - kitchen knives, pocket knives, small edc folders,25° - large edc folders, hunting and outdoor knives,30° - survival knives, tools for hard workStonesThe Lansky LK3DM set includes 3 diamond stones , which allow the main activities of repairing, sharpening and smoothing the cutting edge.The evenly raised diamond-coated steel plates are mounted in different coloured polymer housings, allowing quick identification of each grade.The diamond coating is harder than sintered carbide, making sharpening fairly quick and easy and requiring no water or oil.To maximise the life of the diamond plates, do not press down hard on the blade when sharpening.Clean the diamond tiles with a nylon brush (supplied) and wash in warm water with a mild detergent.In combination with stones :Lansky Coarse Diamond LDHCR 120 grit is used to pre-sharpen and repair damaged cutting edges.Lansky Medium Diamond LDHMD 280 grit is used for working edge and sharpening very dull cutting edges.The Lansky Fine Diamond LDHFN 600 with fine gradation is used to smooth the blade and quickly sharpen slightly dull edges.The set also includes Lansky Nathans grinding oil, which increases the quality and efficiency of sharpening. The discs, coated with a few drops of oil, wear more slowly, which extends their life and reduces scratching of the blade surface.To increase the stability and convenience of sharpening, you should also consider purchasing the LM010 vise, which is used to attach the system to a table or desk top.The Lansky LK3DM set is supplied with a sealed polymer box for easy transportation of the elements.DESCRIPTION COMMENTS (0) REQUEST PRODUCT SPECIFICATIONSPage informationWhat are you sharpening?ceramic knife,steel knifeGrade typedurai / 120,medium / 280,fine / 600Blade type singleSharpening type sharpening systemSharpening type professional sharpening systemFurther informationSharpening material diamond