Walther EDK is a budget version of the Walther MME (Messermagazin-Edition) knife, which was produced in a limited series of 100 pieces. The German magazine "Messermagazin" offered its readers a competition to design a new everyday knife. Readers chose a design by Simon Telpl, and this is how the Walther MME (Messermagazin-Edition) knife was created, a limited series of only 100 pieces. The perfect edc knife The 75 mm long blade is made of 440C stainless steel, hardened to 59 HRC. Resistance to wear and corrosion, good sharpness retention and ease of sharpening make the 440C steel blade perfect for everyday use. It is worth noting that a pocket ceramic sharpener is enough to sharpen such steel. The blade was finished with the satin technique (polishing), which reduces light reflections and masks scratches caused during the use of the knife. The blade with a usable drop-point profile has a flat grind, a strong point and a cutting edge with a gentle curvature, thanks to which the knife provides good cutting properties and high penetration. Classic unfolding The blade is unfolded using two hands, using a nail cutout. This classic solution has been used for several decades, e.g. in pocket knives and allows you to carry it legally in most EU countries. Thanks to the use of a universal pin, we can easily adjust the smoothness of unfolding the blade. Precise operation of the knife is facilitated by milling cutters on the back of the blade, allowing for a stable thumb rest. Lockable blade The blade, after unfolding, is locked using the liner-lock mechanism. After unfolding the blade, the spring lining acts as a lock, which rests against the back of the blade, thus preventing it from folding. Liner-lock is valued for its simplicity, reliability and resistance to heavy loads. Light handle The Walther EDK has textured polymer cladding attached to the frame with screws. In the back of the handle there is a hole for a paracord braid. TECHNICAL DATA Basic information Blade profile Drop Point Blade lock type Liner Lock Knife type folding Opening type nail cutout Steel type stainless - 440C Additional data Cladding material plastic - polymer Corrosion resistance tall Dulling resistance mean Cut type flat Application (destination) EDC Dimensions Total length [mm] 182 Blade length [mm] 75 weight [g] 92 Manufacturer information Producer Walter, Germany